VIOFO HK6 Hardwire Kit with Fuse Taps
Compatible VIOFO models
As listed by VIOFO for the HK6. The A229 series and A119 Mini 2 use the HK4; the VS1 uses the HK5.
Quick specs
- Powers parking mode — keeps the camera running with the engine off so incidents are still recorded.
- Four low-voltage cut-off levels — stops powering the camera when the battery reaches the level you choose.
- Battery voltage on your video — sent to the camera over Bluetooth, with no pairing needed.
- Detachable input and output cables — for easier routing and future upgrades.
- Eight fuse taps included — two each of Mini (ATS), Mini Low Profile, Micro 2 and ATO (ATC).
Why it stands out
What's in the box
The HK6 is VIOFO’s hardwire kit for the A329S and A119M Pro. It powers parking mode from the fuse box, protects the battery with four cut-off levels, and is the first VIOFO kit to report battery voltage to the camera.
Which dashcams it fits
VIOFO lists the HK6 for the A329S series and the A119M Pro. On Dashcams.ae we pair it with the models below. The A229 series and A119 Mini 2 use the HK4, and the VS1 uses the HK5.
3 dashcams on Dashcams.ae list this as a matching accessory.
How the HK6 powers parking mode
The HK6 connects to a constant (battery) fuse, an ignition-switched (ACC) fuse and a ground point, and powers the camera over USB-C. With ACC detection, the camera moves into parking mode when you switch off and back to normal recording when you start the car.
Its input and output cables detach from the control box, which makes routing easier and lets you replace one part without rewiring.
- Input
- 12V or 24V
- Camera plug
- USB-C
- Cable
- 4 m (13.1 ft)
- Extras
- Bluetooth voltage reporting
Low-voltage protection and the UAE summer
Parking mode runs from the car battery. The HK6 cuts power to the camera when the battery falls to the level you pick, out of four, so there is charge left to start the car.
It also broadcasts the battery voltage over Bluetooth. The camera picks it up automatically and shows it on the recording, so you can see how your battery is holding up.
Installation
Tap a constant fuse and an ignition-switched fuse with the included fuse taps and ground the black wire to bare metal. The kit includes two taps each in Mini, Mini Low Profile, Micro 2 and ATO sizes.
If you are not comfortable working at the fuse box, a dash cam installer can fit it.
- The HK6 kit
- Fuse taps that match your fuse box (included)
- A trim tool to tuck the cable behind the headliner and A-pillar
Pros, cons & verdict
Pros
- Four low-voltage cut-off levels
- Battery voltage shown on video
- Eight fuse taps included
- Detachable cables
- Works on 12V and 24V vehicles
Cons
- Costs more than the HK4
- Only listed VIOFO models are supported
- Needs fuse box access or an installer
Our verdict
Fuse taps in the box and battery voltage on your footage: the kit made for the A329S
The HK6 does everything the HK4 does, adds Bluetooth voltage reporting and detachable cables, and comes with eight fuse taps. It is the kit VIOFO lists for the A329S and A119M Pro.
Alternatives
Other VIOFO hardwire kits
| VIOFO HK6 Hardwire Kit with Fuse Taps | VIOFO HK4 USB-C Hardwire Kit | VIOFO HK5 Hardwire Kit for VS1 | |
|---|---|---|---|
| Price on Dashcams.ae | AED 182.90 | AED 89.99 | AED 99.99 |
| Connector | USB-C | USB-C | USB-C |
| Low-voltage cut-off | 4 levels | 4 levels | 4 levels |
| Fuse taps | 8 included | Not included | Not included |
| Voltage on video | Yes, via Bluetooth | Not listed | Not listed |
| Made for | A329S, A119M Pro | A229, A119 Mini 2, A139 Pro | VS1 |
Who should buy it
Specifications
| Brand | VIOFO |
|---|---|
| Model | HK6 with 8-piece fuse tap set |
| Camera connector | USB Type-C |
| Vehicle input | 12V to 24V |
| Low-voltage cut-off | 4 selectable levels |
| Parking mode switching | ACC detection |
| Battery voltage | Broadcast over Bluetooth, shown on video |
| Cable | Detachable input and output; 4 m HK6 cable |
| Fuse taps | 8 included: Mini (ATS), Mini Low Profile, Micro 2, ATO (ATC) |
| Listed compatibility | A329S series, A119M Pro |
FAQ
Does the HK6 work with the A229 Pro?
Do I need to pair the Bluetooth voltage feature?
Which fuse taps are included?
Can I fit it myself?
Specification: VIOFO HK6 Hardwire Kit with Fuse Taps
|












