VIOFO HK5 Hardwire Kit for VS1
Compatible VIOFO model
VIOFO lists the HK5 for the VS1 only. Other VIOFO cameras use the HK4 or HK6.
Quick specs
- Powers parking mode on the VS1 — keeps the camera running with the engine off.
- Four low-voltage cut-off levels — protects the battery at the level you choose.
- Switches modes on its own — ACC detection moves the VS1 into parking mode at switch-off.
- Works on 12V and 24V vehicles — from cars to trucks.
- Fuse taps sold separately — you need two that match your fuse box.
Why it stands out
What's in the box
Not included: add-a-circuit fuse taps (two needed). See the VIOFO fuse tap kit.
The VS1 Mini is a compact 2K camera, and the HK5 is the kit VIOFO makes for it. It wires the camera into the fuse box so it can keep recording in parking mode, and cuts the power before the battery runs low.
Which dashcams it fits
VIOFO lists the HK5 for the VS1 dash cam only. On Dashcams.ae we pair it with the VS1 Mini.
1 dashcam on Dashcams.ae list this as a matching accessory.
How the HK5 powers parking mode
The red battery wire goes to a constant fuse, the yellow ACC wire to an ignition-switched fuse, and the ground wire to the car body. The camera end is USB-C.
When the ACC wire switches off, the VS1 changes to parking mode by itself, and back to normal recording when you start the car.
- Input
- 12V or 24V
- Camera plug
- USB-C
- Cable
- 4 m (13.1 ft)
- Wires
- Battery, ACC, ground
Low-voltage protection and the UAE summer
The HK5 stops powering the camera when the battery falls to the cut-off level you choose, out of four, so the car still starts.
A higher cut-off gives less recording time but more reserve, which is safer on an older battery.
Installation
Find a constant fuse and an ignition-switched fuse, tap both with add-a-circuit fuse taps and ground the black wire. The HK5 does not come with fuse taps, so buy two in your fuse box size.
If you are not comfortable at the fuse box, a dash cam installer can fit it.
- The HK5 kit
- Fuse taps that match your fuse box
- A trim tool to tuck the cable behind the headliner and A-pillar
Pros, cons & verdict
Pros
- Unlocks parking mode on the VS1
- Four low-voltage cut-off levels
- Switches modes by itself
- Works on 12V and 24V vehicles
Cons
- Fuse taps not included
- VS1 only
- Needs fuse box access or an installer
Our verdict
The only VIOFO kit made for the VS1 Mini
Simple and effective: the HK5 unlocks parking mode on the VS1 and protects the battery with four cut-off levels. Remember to buy two fuse taps with it.
Alternatives
Other VIOFO hardwire kits
| VIOFO HK5 Hardwire Kit for VS1 | VIOFO HK4 USB-C Hardwire Kit | VIOFO HK6 Hardwire Kit with Fuse Taps | |
|---|---|---|---|
| Price on Dashcams.ae | AED 99.99 | AED 89.99 | AED 182.90 |
| Connector | USB-C | USB-C | USB-C |
| Fuse taps | Not included | Not included | 8 included |
| Made for | VS1 | A229, A119 Mini 2, A139 Pro | A329S, A119M Pro |
Who should buy it
Specifications
| Brand | VIOFO |
|---|---|
| Model | HK5 |
| Camera connector | USB Type-C |
| Vehicle input | 12V to 24V |
| Low-voltage cut-off | 4 selectable levels |
| Parking mode switching | ACC detection |
| Cable length | 4 m (13.1 ft) |
| Wires | Battery (red), ACC (yellow), ground |
| Fuse taps | Not included (two needed) |
| Listed compatibility | VIOFO VS1 |
FAQ
Does the HK5 work with other VIOFO cameras?
Are fuse taps included?
Can I fit it myself?
Specification: VIOFO HK5 Hardwire Kit for VS1
|










