VIOFO HK5 Hardwire Kit for VS1

VIOFO HK5 Hardwire Kit for VS1

Parking mode without a flat battery in the UAE summerThe kit powers the camera while you are parked and cuts the power before the car battery drops too far to start the engine.

Compatible VIOFO model

VIOFO lists the HK5 for the VS1 only. Other VIOFO cameras use the HK4 or HK6.

Quick specs

USB-CCamera connector
12V / 24VVehicle input
4 levelsLow-voltage cut-off
ACC detectionParking mode switching
4 m (13.1 ft)Cable length
3 wiresBattery, ACC, ground
Not includedFuse taps
VS1 MiniMade for
  • Powers parking mode on the VS1 — keeps the camera running with the engine off.
  • Four low-voltage cut-off levels — protects the battery at the level you choose.
  • Switches modes on its own — ACC detection moves the VS1 into parking mode at switch-off.
  • Works on 12V and 24V vehicles — from cars to trucks.
  • Fuse taps sold separately — you need two that match your fuse box.

Why it stands out

Parking mode for the VS1
Keeps the VS1 powered while parked so impacts and events are recorded.
Parking
Battery protection you set
Four cut-off levels let you trade parking time against battery reserve.
Low-voltage cut-off
Clean, hidden install
A 4 m cable runs to the fuse box and frees up the 12V socket.
Installation

What's in the box

HK5 hardwire cable (4 m)

Not included: add-a-circuit fuse taps (two needed). See the VIOFO fuse tap kit.

AED99.99
Add to compare
Secure checkout
on Amazon.ae
Amazon.ae
returns policy
VIOFO
manufacturer warranty
Delivered in the UAE via Amazon.ae
Priced in AED, final price shown at checkout
Delivery date confirmed on Amazon.ae
Will it fit your dashcam? Check the compatible models on this page, or let the finder match a dashcam and the accessories it needs.
Open Dashcam Finder →

The VS1 Mini is a compact 2K camera, and the HK5 is the kit VIOFO makes for it. It wires the camera into the fuse box so it can keep recording in parking mode, and cuts the power before the battery runs low.

Which dashcams it fits

VIOFO lists the HK5 for the VS1 dash cam only. On Dashcams.ae we pair it with the VS1 Mini.

1 dashcam on Dashcams.ae list this as a matching accessory.

How the HK5 powers parking mode

The red battery wire goes to a constant fuse, the yellow ACC wire to an ignition-switched fuse, and the ground wire to the car body. The camera end is USB-C.

When the ACC wire switches off, the VS1 changes to parking mode by itself, and back to normal recording when you start the car.

Input
12V or 24V
Camera plug
USB-C
Cable
4 m (13.1 ft)
Wires
Battery, ACC, ground

Low-voltage protection and the UAE summer

The HK5 stops powering the camera when the battery falls to the cut-off level you choose, out of four, so the car still starts.

A higher cut-off gives less recording time but more reserve, which is safer on an older battery.

Leaving the car for a few days? For an airport car park or a trip away, choose the highest cut-off you can or switch parking mode off in the camera.

Installation

Find a constant fuse and an ignition-switched fuse, tap both with add-a-circuit fuse taps and ground the black wire. The HK5 does not come with fuse taps, so buy two in your fuse box size.

If you are not comfortable at the fuse box, a dash cam installer can fit it.

  • The HK5 kit
  • Fuse taps that match your fuse box
  • A trim tool to tuck the cable behind the headliner and A-pillar

Pros, cons & verdict

Pros

  • Unlocks parking mode on the VS1
  • Four low-voltage cut-off levels
  • Switches modes by itself
  • Works on 12V and 24V vehicles

Cons

  • Fuse taps not included
  • VS1 only
  • Needs fuse box access or an installer

Our verdict

The only VIOFO kit made for the VS1 Mini

Simple and effective: the HK5 unlocks parking mode on the VS1 and protects the battery with four cut-off levels. Remember to buy two fuse taps with it.

Parking mode VS1 USB-C

Alternatives

Other VIOFO hardwire kits

VIOFO HK4 USB-C Hardwire Kit VIOFO HK4 USB-C Hardwire Kit HK4: for the A229 series and A119 Mini 2. AED 89.99
VIOFO HK6 Hardwire Kit with Fuse Taps VIOFO HK6 Hardwire Kit with Fuse Taps HK6: for the A329S and A119M Pro, fuse taps included. AED 182.90
VIOFO HK5 Hardwire Kit for VS1 VIOFO HK4 USB-C Hardwire Kit VIOFO HK6 Hardwire Kit with Fuse Taps
Price on Dashcams.ae AED 99.99 AED 89.99 AED 182.90
Connector USB-C USB-C USB-C
Fuse taps Not included Not included 8 included
Made for VS1 A229, A119 Mini 2, A139 Pro A329S, A119M Pro

Who should buy it

Good fit VIOFO VS1 Mini owners who want parking mode without a separate battery pack.
Good fit Ride-hailing and fleet drivers who want the camera to switch to parking mode by itself.
Look elsewhere Owners of other dash cam brands should buy the kit made for their camera.
Look elsewhere Drivers who want a plug-in setup with no fuse box work: a hardwire kit must be wired in.

Specifications

Brand VIOFO
Model HK5
Camera connector USB Type-C
Vehicle input 12V to 24V
Low-voltage cut-off 4 selectable levels
Parking mode switching ACC detection
Cable length 4 m (13.1 ft)
Wires Battery (red), ACC (yellow), ground
Fuse taps Not included (two needed)
Listed compatibility VIOFO VS1

FAQ

Does the HK5 work with other VIOFO cameras?
VIOFO lists it for the VS1 only. The A229 series uses the HK4 and the A329S uses the HK6.
Are fuse taps included?
No. You need two add-a-circuit fuse taps for your fuse box type.
Can I fit it myself?
Yes, if you are comfortable finding fuses with a circuit tester and fitting fuse taps. Otherwise a dash cam installer can fit it alongside the camera.

Specification: VIOFO HK5 Hardwire Kit for VS1

Brand

VIOFO

VIOFO HK5 Hardwire Kit for VS1
VIOFO HK5 Hardwire Kit for VS1

AED99.99

Dashcams.ae
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart