DDPAI Hardwire Kit
Compatible DDPAI models
As listed by DDPAI. The N4T Pro is not on the list.
Quick specs
- Enables 24-hour parking monitoring — power to the dash cam even with the car turned off.
- Works with DDPAI IPS power management — the camera monitors vehicle voltage to prevent battery drain.
- 12V/2A to 5V/3A — stable voltage regulation, per DDPAI.
- 3 m cable — for routing to the fuse box.
- 18-month DDPAI guarantee — with 24-hour support response.
Why it stands out
What's in the box
Not included: fuse taps are not listed as included.
DDPAI’s hardwire kit powers its dual- and three-channel cameras from the fuse box so they can keep recording in parking mode. Battery protection comes from the camera’s IPS power management.
Which dashcams it fits
DDPAI lists this kit for the Z60, Z60 Pro, Z90 Master, N2 Dual, Z60 Master, Z50 Pro, Z90 Pro, N5 Dual, N3 Pro, Z60 πLink and Z60T. On Dashcams.ae we pair it with the Z60 Master, Z50 Pro and N2 Dual. DDPAI does not list it for the N4T Pro.
DDPAI Z60 Master 2 Channel 4K Dashcam
DDPAI Z50 Pro 2 Channel 4K Dashcam
DDPAI N2 Dual 2 Channel 2.5K Dashcam3 dashcams on Dashcams.ae list this as a matching accessory.
How the DDPAI kit powers parking mode
The kit steps 12V vehicle power down to 5V/3A for the camera and keeps it powered when the car is turned off, so the camera can run 24-hour parking monitoring.
DDPAI’s IPS power management in the camera watches the vehicle voltage to prevent battery drain.
- Input
- 12V/2A
- Output
- 5V/3A
- Cable
- 3 m
- Battery protection
- Camera IPS power management
Low-voltage protection and the UAE summer
DDPAI handles battery protection in the camera through its IPS power management, which monitors the vehicle voltage. Check the parking settings in the DDPAI app after fitting.
On an older battery, keep parking recording short in the hottest months.
Installation
Connect the kit to the fuse box and route the 3 m cable behind the trim to the camera. Fuse taps are not listed as included, so buy ones that match your fuse box.
If you are not comfortable at the fuse box, a dash cam installer can fit it.
- The DDPAI hardwire kit kit
- Fuse taps that match your fuse box
- A trim tool to tuck the cable behind the headliner and A-pillar
Pros, cons & verdict
Pros
- 24-hour parking monitoring
- Works with DDPAI IPS power management
- 18-month guarantee
- Low price
Cons
- Fuse taps not listed as included
- Not listed for the N4T Pro
Our verdict
The DDPAI kit for 24-hour parking on the Z60 Master, Z50 Pro and N2 Dual
It is inexpensive, backed by an 18-month guarantee and works with DDPAI’s camera-side power management. Buy fuse taps to go with it.
Who should buy it
Specifications
| Brand | DDPAI |
|---|---|
| Type | Hardwire kit |
| Input | 12V/2A |
| Output | 5V/3A |
| Cable length | 3 m |
| Battery protection | Camera IPS power management |
| Guarantee | 18 months |
| Listed compatibility | Z60, Z60 Pro, Z90 Master, N2 Dual, Z60 Master, Z50 Pro, Z90 Pro, N5 Dual, N3 Pro, Z60 πLink, Z60T |
FAQ
Does it fit the DDPAI N4T Pro?
Are fuse taps included?
Can I fit it myself?
Specification: DDPAI Hardwire Kit
|






